? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 1 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 1.2w 5.7?8.5 ghz m/a-com products rohs compliant MAAP-000068-PKG003 part status: preliminary rev: c features ? 1.2 watt saturated output power level ? variable drain voltage (6-10v) operation ? msag ? process description the MAAP-000068-PKG003 is a 3-stage 1.2 w power amplifier with on-chip bias networks in a 20 lead, 5 mm pqfn package, allowing easy assembly. this product is fully matched to 50 ohms on both the input and output. it can be used as a power amplifier stage or as a driver stage in high power applications. each device is 100% rf tested to ensure performance compliance. the part is fabricated using m/a-com?s gaas multifunction self-aligned gate (msag) process. the 5 mm pqfn package has a lead-free lead finish that is rohs compliant and compatible with a 260 o c reflow temperature. the package also features low lead inductance and an excellent ther- mal path. the mttf is 1,000,000 hours at 170 o c. 1. t c = case temperature 2. adjust v gg between ?2.6 and ?1.2v to achieve specified idq. parameter symbol typical units bandwidth f 5.7-8.5 ghz output power p out 31 dbm 1-db compression point p1db 30 dbm small signal gain g 25 db input vswr vswr 1.3:1 gate current i gg 5 ma drain current i dd 600 ma output vswr vswr 1.8:1 output third order intermod, p out = 20 dbm (dcl) imd3 39 dbc output third order intercept toi 40 dbm electrical characteristics: t c = 35c 1 , z 0 = 50 , v dd = 8v, i dq = 320ma 2 , p in = 8dbm, r g = 300 ? primary applications ? point-to-point radio ? 6, 7, and 8 ghz bands ? satcom ? broadband wireless access yyww a p0 68g xxx macom ordering information description die tape & reel (500) tape & reel (1000) plastic pkg sample board part number maapgm0068-die maap-000068-tr0500 maap-000068-tr1000 maap-000068-smb003
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 2 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 1.2w 5.7?8.5 ghz m/a-com products rohs compliant MAAP-000068-PKG003 part status: preliminary rev: c maximum ratings 3 operating instructions this device is static sensitive. please handle with care. to operate the device, follow these steps. 1. apply v gg = -2 v, v dd = 0 v. 2. ramp v dd to desired voltage, typically 8.0 v. 3. adjust v gg to set i dq , (approximately @ ?2 v). 4. set rf input. 5. power down sequence in reverse. turn v gg off last. characteristic symbol min typ max unit drain voltage v dd 6.0 8.0 10.0 v gate voltage v gg -2.6 -2.0 -1.2 v input power p in 8.0 11.0 dbm thermal resistance jc 32 c/w case temperature t c note 5 c recommended operating conditions 4 parameter symbol absolute maximum units input power p in 13.0 dbm drain supply voltage v dd +12.0 v gate supply voltage v gg -3.0 v quiescent drain current (no rf) i dq 520 ma junction temperature t j 170 c storage temperature t stg -55 to +150 c quiescent dc power dissipated (no rf) p diss 2.8 w 3. operation beyond these limits may result in permanent damage to the part. 4. operation outside of these ranges may reduce product reliability. 5. case temperature = 170c ? jc * v dd * i dq power derating curve, quiescent (no rf) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0 20 40 60 80 100 120 140 160 180 maximum allowable case temperature [c] peak power dissipation [watts]
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 3 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 1.2w 5.7?8.5 ghz m/a-com products rohs compliant MAAP-000068-PKG003 part status: preliminary rev: c figure 2. small signal gain and input & output vswr vs. frequency and quiescent bias (vdd / idq) 0 4 8 12 16 20 24 28 32 36 40 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 frequency (ghz) output power (dbm) 1 2 3 4 5 6 vswr 6v / 0.40a 8v / 0.33a 10v / 0.27a small signal gain output vswr input vswr figure 3. saturated output power vs. frequency and quiescent bias condition (vdd / idq) 20 22 24 26 28 30 32 34 36 38 40 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 frequency (ghz) p1db (dbm) 6v / 0.40a 8v / 0.33a 10v / 0.27a figure 4. saturated power added efficiency vs. frequency and quiescent bias condition (vdd / idq) 0 5 10 15 20 25 30 35 40 45 50 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 frequency (ghz) pae (%) 6v / 0.40a 8v / 0.33a 10v / 0.27a figure 5. saturated output power vs. frequency and case temperature at vd = 8v and idq = 0.33a 20 22 24 26 28 30 32 34 36 38 40 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 frequency (ghz) output power (dbm) -25oc 35oc 90oc figure 6. small signal gain & saturated output power, power added efficiency and drain current vs. case temperature at 7.0 ghz, vd = 8v, and idq = 0.33a 20 22 24 26 28 30 32 34 36 38 40 -25-15-5 5 1525354555657585 case temperature (oc) ssg (db), pout (dbm), pae (%) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 ids (a) ssg pout pae ids figure 1. p1db vs. frequency and quiescent bias condition (vdd / idq) 20 22 24 26 28 30 32 34 36 38 40 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 frequency (ghz) p1db (dbm) 6v / 0.40a 8v / 0.33a 10v / 0.27a
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 4 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 1.2w 5.7?8.5 ghz m/a-com products rohs compliant MAAP-000068-PKG003 part status: preliminary rev: c figure 7. output power vs. input power and frequency at vd = 6v and idq = 0.40a 10 12 14 16 18 20 22 24 26 28 30 32 34 -12 -10 -8 -6 -4 -2 0 2 4 6 8 input power (dbm) output power (dbm) 6.0 ghz 7.0 ghz 8.5 ghz figure 8. gain vs. output power and frequency at vd = 6v and idq = 0.40a 15 17 19 21 23 25 27 29 31 33 35 10 12 14 16 18 20 22 24 26 28 30 32 34 output power (dbm) gain (db) 6.0 ghz 7.0 ghz 8.5 ghz figure 9. output power vs. input power and frequency at vd = 8v and idq = 0.33a 10 12 14 16 18 20 22 24 26 28 30 32 34 -12-10-8-6-4-20246810 input power (dbm) output power (dbm) 6.0 ghz 7.0 ghz 8.5 ghz figure 10. gain vs. output power and frequency at vd = 8v and idq = 0.33a 15 17 19 21 23 25 27 29 31 33 35 10 12 14 16 18 20 22 24 26 28 30 32 34 output power (dbm) gain (db) 6.0 ghz 7.0 ghz 8.5 ghz figure 11. output power vs. input power and frequency at vd = 10v and idq = 0.27a 10 12 14 16 18 20 22 24 26 28 30 32 34 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 input power (dbm) output power (dbm) 6.0 ghz 7.0 ghz 8.5 ghz figure 12. gain vs. output power and frequency at vd = 10v and idq = 0.27a 15 17 19 21 23 25 27 29 31 33 35 10 12 14 16 18 20 22 24 26 28 30 32 34 output power (dbm) gain (db) 6.0 ghz 7.0 ghz 8.5 ghz
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 5 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 1.2w 5.7?8.5 ghz m/a-com products rohs compliant MAAP-000068-PKG003 part status: preliminary rev: c figure 13. power added efficiency vs. input power and frequency at vd = 6v and idq = 0.40a 0 5 10 15 20 25 30 35 40 45 50 -12 -10 -8 -6 -4 -2 0 2 4 6 8 input power (dbm) pae (%) 6.0 ghz 7.0 ghz 8.5 ghz figure 14. drain current vs. input power and frequency at vd = 6v and idq = 0.40a 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 -12 -10 -8 -6 -4 -2 0 2 4 6 8 input power (dbm) ids (a) 6.0 ghz 7.0 ghz 8.5 ghz figure 15. power added efficiency vs. input power and frequency at vd = 8v and idq = 0.33a 0 5 10 15 20 25 30 35 40 45 50 -12-10-8-6-4-20246810 input power (dbm) pae (%) 6.0 ghz 7.0 ghz 8.5 ghz figure 16. drain current vs. input power and frequency at vd = 8v and idq = 0.33a 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 input power (dbm) ids (a) 6.0 ghz 7.0 ghz 8.5 ghz figure 17. power added efficiency vs. input power and frequency at vd = 10v and idq = 0.27a 0 5 10 15 20 25 30 35 40 45 50 -12-10-8-6-4-2024681012 input power (dbm) pae (%) 6.0 ghz 7.0 ghz 8.5 ghz figure 18. drain current vs. input power and frequency at vd = 10v and idq = 0.27a 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 input power (dbm) ids (a) 6.0 ghz 7.0 ghz 8.5 ghz
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 6 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 1.2w 5.7?8.5 ghz m/a-com products rohs compliant MAAP-000068-PKG003 part status: preliminary rev: c figure 19. third order intercept vs. output power and frequency at vd = 6v and idq = 0.40a 30 32 34 36 38 40 42 44 46 48 50 8 1012141618202224262830 fundamental output power - single carrier (dbm) ip3 (dbm) 6.0 ghz 7.0 ghz 8.0 ghz figure 20. third order intermod vs. output power and frequency at vd = 6v and idq = 0.40a 0 10 20 30 40 50 60 70 80 8 1012141618202224262830 fundamental output power - single carrier (dbm) im3 (dbc) 6.0 ghz 7.0 ghz 8.0 ghz figure 21. third order intercept vs. output power and frequency at vd = 8v and idq = 0.33a 30 32 34 36 38 40 42 44 46 48 50 8 1012141618202224262830 fundamental output power - single carrier (dbm) ip3 (dbm) 6.0 ghz 7.0 ghz 8.0 ghz figure 22. third order intermod vs. output power and frequency at vd = 8v and idq = 0.33a 0 10 20 30 40 50 60 70 80 8 1012141618202224262830 fundamental output power - single carrier (dbm) im3 (dbc) 6.0 ghz 7.0 ghz 8.0 ghz figure 23. third order intercept vs. output power and frequency at vd = 10v and idq = 0.27a 30 32 34 36 38 40 42 44 46 48 50 8 1012141618202224262830 fundamental output power - single carrier (dbm) ip3 (dbm) 6.0 ghz 7.0 ghz 8.0 ghz figure 24. third order intermod vs. output power and frequency at vd = 10v and idq = 0.27a 0 10 20 30 40 50 60 70 80 8 1012141618202224262830 fundamental output power - single carrier (dbm) im3 (dbc) 6.0 ghz 7.0 ghz 8.0 ghz
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 7 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 1.2w 5.7?8.5 ghz m/a-com products rohs compliant MAAP-000068-PKG003 part status: preliminary rev: c figure 25. third order intercept vs. case temperature and frequency at single carrier output power level = 20 dbm, vd = 8v and idq = 0.33a 30 32 34 36 38 40 42 44 46 48 50 -25-15-5 5 1525354555657585 case temperature (oc) ip3 (dbm) 6.0 ghz 7.0 ghz 8.0 ghz figure 26. third order intermod vs. case temperature and frequency at single carrier output power level = 20 dbm, vd = 8v and idq = 0.33a 10 15 20 25 30 35 40 45 50 55 60 -25-15-5 5 1525354555657585 case temperature (oc) im3 (dbc) 6.0 ghz 7.0 ghz 8.0 ghz
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 8 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 1.2w 5.7?8.5 ghz m/a-com products rohs compliant MAAP-000068-PKG003 part status: preliminary rev: c figure 28. recommended bias configuration. note: the exposed pad centered on the package bottom must be connected to rf and dc ground for proper electrical and thermal operation. figure 27. 5x5 mm 20-lead mlp. refer to m/a-com application note surface mounting instructions for pqfn packages #s2083 * for assembly guidelines. additional precaution: all parts must receive a bake-out of 125oc for 24 hours prior to any solder reflow operation. *application notes can be found by going to the site search p age of m/a-com?s web page (http://www.macom.com/application%20note s/ index.htm) and searching for the required application note. 100pf ( as close to the packag e as possible) 0.1 f v dd yyww ap068g xxx macom 0.1 f v gg 100pf (as close to the packag e as possible) 220 o o a p0 68g
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 9 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. amplifier, power, 1.2w 5.7?8.5 ghz m/a-com products rohs compliant MAAP-000068-PKG003 part status: preliminary rev: c figure 29. demonstration board p/n maap -000068-smb003 (available upon request). vgg gnd (twisted pair) r g yyw w a p 0 68g xxx macom vdd gnd (twisted pair) additional bypassing may be required if wires are longer than 12".
|
